?

Log in

No account? Create an account
In which Ben does the math on a hoverboard. - Adventures in Engineering — LiveJournal
The wanderings of a modern ronin.

Ben Cantrick
  Date: 2006-12-23 22:42
  Subject:   In which Ben does the math on a hoverboard.
Public
  Mood:innumeracy ensues
  Music:Chemlab (The Magnetic Field Remixes) - 21st Century


The equation for the magnetic force on a wire is:

F = BLI

B is the magnetic field, in Teslas
L is the length of the wire, in meters
I is the current, in amps

The earth's magnetic field is about .3-.6 Gauss. There are 10,000 Gauss in a Tesla. Let's be optimistic and call it .5 Gauss. Converting to Teslas, B = .00005

Let's say the wire is one meter long, because it makes the math easier. L = 1.

How much force do we need? Let's say a 200 lb person, call it 90 kg. Gravity pulls them down with an acceleration of 9.8 m/s^2. F = ma, so F = 90 * 9.8, or 882 Newtons.

882 = I * 1 * .00005

I = 882 / .00005

I = 17,640,000 amps

A little more than seventeen and a half million amps.

To get some sense of scale, most circuit breakers for houses are about 200 amps. Your whole house, everything in it, all the lights going full blast, stereo, fridge, washer/dryer, everything, takes less than 200 amps. (And requires a cable about 3/4 of an inch across.) Doing the math, we see that this is the electrical equivalent of 88,200 houses going full bore.


In terms of energy, P = I^2V, so this comes to 3.7 x 10^16 Joules per second. In more familiar terms, this about the same energy as you would produce if you exploded 40 million tons of TNT. Per second.


As your lawyer, I advise you to stick with Inductrack. ;]
Post A Comment | 7 Comments | | Link






Alex Belits
  User: abelits
  Date: 2006-12-24 23:16 (UTC)
  Subject:   Re: Whoops!

Right -- if you have a small enough coil in a field that can be assumed to be constant and parallel, all you can do is to make it align with the field, so if you place one side of the coil on the ground, the other one side will rise.

This also applies to the original "single-wire" version because you will have to somehow complete the circuit. You will have some current going in the opposite direction through the field, thus creating the force in the opposite direction, so if you won't place your power source on the ground, this force will be applied to your device as well. If your power source is a generator or battery, current has to go through the whole loop, thus making it impossible to raise the power source if it is a part of your device. If it's a charged capacitor, you have a small distance where the charges don't travel, however magnetic field produced by the change in electric field will compensate for that.

So the whole thing can only work if either:

  1. Part of the circuit is fixed on the ground.
  2. The circuit is large enough to cover the area where Earth's magnetic field is not uniform.
  3. You are in the region where Earth's magnetic field is non-uniform enough for the device to work.

First case is probably not what it is supposed to be for -- if it's possible to place a part of the device on the ground, why not also place a coil, magnet or passive loop there, and make a much more efficient device without crazy power requirements?

Second thing for most of the Earth's surface would require a truly giant structure. A loop suspended on a space elevator column may work, but then you would already have a space elevator. A loop around the Earth will also work, though unless the loop is made of a superconductor, the amount of energy necessary to power it would be unsafe to produce or release.

The third case (what is actually part of the second one) is what may make it work around the Earth's magnetic poles, or magnetic anomalies, though it would still require a very large device, with no hope for any practical use.

Reply | Parent | Thread | Link



browse
May 2015